CNC parts processing manufacturer! It's not that you don't know how to maintain machine tools, but that you
CNC parts processing manufacturer! It's not that you don't know how to maintain the machine tool, it's that you didn't use the right method!
There are many machine tools in CNC machining manufacturers that have problems due to lack of maintenance, so we need to pay certain attention to the maintenance of CNC machining machines.
The maintenance of CNC machining machines is divided into daily inspection, weekly inspection, monthly inspection, quarterly inspection, and semi annual inspection. CNC parts processing manufacturer
Daily inspection:
The main projects include hydraulic system, spindle lubrication system, guide rail lubrication system, cooling system, and pneumatic system. Daily inspection is based on the normal condition of the system, such as checking whether the coolant in the coolant tank is sufficient and adding it in a timely manner if it is not enough.
Weekly inspection:
Its main projects include machine tool parts and spindle lubrication system, which should be checked correctly every week, especially for removing iron filings from machine tool parts and cleaning external debris.
Monthly inspection:
Mainly inspect the power supply and air dryer, as well as the lubrication of the x, y, and z three-axis tracks. The rated voltage of the power supply is 180v~220V and the frequency is 50Hz under normal conditions. If there is any abnormality, it should be measured and adjusted. The air dryer should be disassembled once a month and then cleaned and assembled. The three-axis track surface must ensure good lubrication.
Seasonal inspection:
The inspection is mainly carried out from three aspects: machine tool bed, hydraulic system, and spindle lubrication system. For example, when inspecting the bed of a machine tool, the main focus is on whether the accuracy and level of the machine tool meet the requirements in the manual. If there are any problems, the mechanic should be contacted immediately. When inspecting the hydraulic system and spindle lubrication system, if there are any problems, new oil should be replaced and cleaned separately.
Half year inspection:
Six months later, CNC parts processing manufacturers should check whether all buttons are sensitive and normal, the hydraulic system of the machine tool, the spindle lubrication system, and the X-axis. If there are problems, new oil should be replaced and cleaned.
Under the premise of reasonable use, CNC parts processing manufacturers should attach great importance to the maintenance of CNC machine tools, increase investment in maintenance work, do a good job in the maintenance of CNC machine tools, improve the service life of CNC machine tools, and ensure the normal use of CNC machine tools.
